It is particularly important to use a gate valve

A gate valve will help you to adjust the flow draining into your sump letting you match the flow on your return pumps. The right drain flow and return flow will let you have a quiet operation, the correct sump water level, as well as a good turnover rate from the sump. It is particularly important to use a gate valve by 50 % popular drain setups, the Herbie overflow method, plus the Bean Animal overflow method view here . Both of these overflow methods are renowned within the hobby because of their quiet operation and precautionary features. Both of these methods were exposed to the hobby by dedicated reefers and so are named after their forum names.


The Herbie method involves an overflow box with two standpipes in the overflow box that drain water to the sump. One standpipe can be used as the main drain and also the other standpipe and line are set up as an urgent situation drain. The main standpipe should sit below the emergency drain and acts because the primary siphon drain for your tank. The main standpipe could possibly get clogged by such as a snail.


When this happens the river level inside the box will rise for the level from the emergency drain plus the emergency drain will trigger and drain water into your sump in lieu of onto the floor. For the most efficient operation and least number of noise, the stream level inside the overflow box needs to be adjusted to certainly the top in the emergency drain standpipe.A gate valve can be a plumbing device that may be run consistent with a pipe and will be adjusted to enhance or decrease water drainage through the line. Most gate valves found in aquariums are made from PVC are available in various connection types and sizes.


Flow adjustment is often accomplished by an interior gate that may be manually adjusted up or down by turning the valves dial. As the dial is opened the gate lifts and allows water to flow from the space beneath gate. Manual switches on the dial slowly move the gate top to bottom making fine adjustments circulate possible. A fully opened gate valve will restrict almost no flow throughout the line and also a closed valve shouldn't allow any water through.


A ball valve is comparable to a gate valve where its main function would be to restrict or allow flow by way of a line. Ball valves found in reef aquariums are constructed of PVC. As the name suggests, a ball valve utilizes a ball using a hole from the valve to allow for or restrict flow in the event the ball valve’s knob is manually turned. When the valve is open the hole within the ball allows water to flow over the line. When the valve is closed, the hole inside ball is protected by the walls with the pipe restricting water from flowing throughout the pipe.

free (€0.00)

Book now

February 08, 2020 03:01 - February 09, 2022 03:01 (GMT +00:00 UTC)

Google Calendar
Microsoft Outlook
.ics file (Apple's iCal & others)



Google maps »